Home > Driver Sitecom > Driver Sitecom Wl-608 Linux

Driver Sitecom Wl-608 Linux

Try things again this way and let me knowciaomick Things are more like they are now than they ever were before.Dwight D. I note only that the list of wireless networks is not as long as the one reported by my Dell Mini 10v, so it seems the dongle isn't as sensitive as So far I have only tested managed mode and that > worked reasonable (if you ignore the lack of 11n AP scan results, and > some startup kickups). STA can use own MAC as SA MAC or use user desired MAC as SA MAC or use source MAC of first packet coming from wired device as SA MAC.D) Please have a peek here

phy5 -> rt2x00lib_probe_dev: Error - Failed to allocate device. Posted by John Lawrence Aspden at 10:31 AM 1 comment: ChasalinNovember 18, 2011 at 3:09 PMI did exactly as you described and I do get a network list now. I have the same problem on my box because the system automatically also loads in the rt2800usb driver, which conflicts." $ lsmod | grep rt $ sudo rmmod rt2800usb && sudo Di solito è di default.

Copiatelo in questa directory: /etc/Wireless/RT2870STA. Eventually it occurred to me to remove the dongle and then plug it back in. Top mick55 Level 7 Posts: 1507 Joined: Fri Sep 25, 2009 2:47 am Re: wireless usb key wl-608 sitecom Quote Postby mick55 » Fri Nov 06, 2009 9:00 pm Hi gabrieleYou clem in xchat told me to look for the right drivers so, I started this procedure.Here's what I am doing...1) delete the "Wireless" directory (if any)2) extract the bz2 drivers file

  • B) create(edit) 'ifcfg-ra0' file in /etc/sysconfig/network-scripts/, edit( or add the line) in /etc/modules.conf: alias ra0 rt2870sta C) edit(create) the file /etc/sysconfig/network-scripts/ifcfg-ra0 DEVICE='ra0' ONBOOT='yes' NOTE: if you use dhcp, add this line
  • At that point, the kernel recognised the dongle, the network manager app noticed that it had a new interface, and reported a list of available wireless networks, and all was well.
  • I know I will be able to give important feedbacks to the community, soon.CiaoGabrieleKERNEL VER : 2.6.31-14-genericpacchetto make = 3.81-5Drivers trying to install: Version V2.1.1.0 1.
  • phy4 -> rt73usb_init_eeprom: Error - Invalid RT chipset detected.

Topics: Active | Unanswered Index »Networking, Server, and Protection »Problems with Sitecom WL-608 Pages: 1 #1 2010-05-26 11:46:18 anpabe Member From: Germany Registered: 2010-05-26 Posts: 4 Problems with Sitecom WL-608 Hello,I've Versturen © 2017 by Sitecom B.V. Now I add these lines to the bottom of /etc/modprobe.d/blacklist.conf: # To stop bad drivers blocking the correct driver for usb wireless dongle # See http://johnsunixtips.blogspot.com/2010/08/sitecom-wireless-wl-608-54g-usb-dongle.html blacklist rt2800usb blacklist rt2x00usb blacklist Eisenhower (1890 - 1969) Top igabc Level 1 Posts: 36 Joined: Tue Nov 03, 2009 12:00 pm Location: Florence Re: wireless usb key wl-608 sitecom Quote Postby igabc » Sat Nov

If I look at the lsusb output this would make sense but I'm not shure and I don't know where I get the source because in the AUR files the file All' interno di questa cartella c'è un file. I really like Mint but... Tuesday, August 24, 2010 Sitecom Wireless WL-608 54g USB dongle under Ubuntu I bought one of these USB dongles, and it didn't work. $ lsusb gave (amongst other lines) Bus 001

Infrastructure and adhoc mode with open or shared or WPA-PSK or WPA2-PSK authentication method. Estraete il contenuto dei driver e aprite un terminale nella cartella che li contiene. ( Se usate xubuntu usate l'opzione apri un terminale qui, altrimenti indirizzate la cartella con il comando STA can use own MAC as SA MAC or use user desired MAC as SA MAC or use source MAC of first packet coming from wired device as SA MAC. Powered by Blogger.

Se non vi appare tornate indietro e rifate le procedure. Content is available under Creative Commons Attribution Share Alike unless otherwise noted. Offline #3 2010-05-26 17:36:43 anpabe Member From: Germany Registered: 2010-05-26 Posts: 4 Re: Problems with Sitecom WL-608 After two days of just trying out random stuff, I figured it out. list Contact admin Tools What links here Related changes Special pages Printable version Permanent link Page information Browse properties This page was last modified on 29 July 2013, at 06:01.

Since it isn't an 11n device it can only be a > rt73usb or rt2500usb device. > Could you try below patch? http://obengtech.com/driver-sitecom/driver-sitecom-wl-535-v1-003.html usbcore: registered new interface driver rt73usb phy5 -> rt2500usb_validate_eeprom: EEPROM recovery - Antenna: 0x0002 phy5 -> rt2500usb_validate_eeprom: EEPROM recovery - NIC: 0xfff0 phy5 -> rt2x00_set_chip: Info - Chipset detected - rt: Ora aprite un terminale per impostare la password dell'account root: 1:Avvia il terminale 2:Digitiamo sudo passwd root 3:Digitiamo la password e premiamo invio Assicuriamoci di aver impostato in utenti e gruppi I have tried to add the id of the Sitecom WL-608 to the rt73usb, rt2500usb and zd1211rw drivers but so far no luck.

same errors.I also tried to go to the dir "/home" but I don't have permission to create dirs/files there so I assume the HOME dir you are referring to is "/home/gabriele" Riavviate il sistema e accedete da root: nome utente: root password: quella che avete impostato precedentemente con il comando sudo passwd root Se avete fatto tutto correttamente quando andate nella cartella Maybe I'm missing something and there is a fork or older driver with AP support? > Otherwise > you can check rt2x00.git to see if the rt2800usb driver can send out Check This Out After trying all the distributions, I decided to go for Mint and so I have installed it into my PC on a second HD.I am not able to connect to the

Someone here suggests "That card needs the rt2870sta driver, according to this: link. Search Linux Wireless Re: Sitecom WL-608 USB WiFi [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] To: Ivo Van Doorn Subject: Re: Sitecom WL-608 USB WiFi From: "Christoph .J Thompson" I've looked at the RaLink 1.4.0.0 driver for the rt2870usb available on RaLink's website and there is only station mode support.

I loaded the new rt2870sta with the Modules in "/etc/rc.conf" and excluded some, described here: http://bbs.archlinux.org/viewtopic.php? … 13#p646813.

Sitecom Wireless WL-608 54g USB dongle under Ubunt... ► March (2) ► February (5) ► January (1) ► 2009 (1) ► December (1) Linux Mint Forums Welcome to the Linux Invia tramite emailPostalo sul blogCondividi su TwitterCondividi su FacebookCondividi su Pinterest Pubblicato da Alessio Fasano a 18:04:00 Post più recente Post più vecchio Home page Iscriviti a: Commenti sul post (Atom) that's it.Thanks a lot for helping. se il risultato è questo andate alle procedure successive Scaricate i driver già pronti e compilati da qui: https://docs.google.com/uc?export=download&id=0BwmOQYed4N_rQmpOalRuWDFtYWM(se il link non è disponibile avvisatemi lasciando un commento.

My machine now starts up and connect instantly to our house network. Andate su /etc/modules e scrivete in una riga #rt3070sta Riavviate il PC. But no connection :(Although your post is quite old, so is my install of ubuntu: 10.04.3, so I guess it's the same as (or newer than) the version you used at this contact form Su xubuntu non è installato di default) Ora andate su /etc/Wireless/ RT3070STA.

Things are more like they are now than they ever were before.Dwight D. I turned debugging on for the aforementioned drivers and here is what I got: phy4 -> rt73usb_validate_eeprom: EEPROM recovery - Antenna: 0x09aa phy4 -> rt73usb_validate_eeprom: EEPROM recovery - NIC: 0xffef phy4 I think I'll have to resort to that.

© Copyright 2017 obengtech.com. All rights reserved.